Why We Developed the External Speaker Wizard

We saw interest for our audio interrupter line of products on a forum and noticed that a potential customer complained that our products were too expensive compared to a normal external speaker that usually mounts under the dash or on the firewall.

Our regular products mount behind the dash out of sight.  Our products also fully mute the stereo when a CB/Ham voice is received, then  automatically switch all the speakers to hear the CB/HAM message through the vehicle speakers, which conform to the acoustics of the vehicle.

It is important to realize that an external speaker does not mute the stereo.  It will still play when an incoming call is received, unlike our audio interrupter products.

We felt he had a valid point and decided to  also add a plain external speaker to our line of products that would be priced competitively to other external speakers on the market. However,  we wanted one that would be the best on the market and designed for the vehicle.

How our External Speaker Wizard  works: When voice is present (volume, set at a pleasant listening level) on a 2 way-radio, the left front stereo output will automatically mute and the left front speaker will switch to 2 way radio voice thus acting as a high-quality external speaker. All other speakers remain unchanged playing and connected to the stereo. The left front speaker remains switched for 3 seconds after the last voice message is received, then returns back automatically to normal stereo play.

The External Speaker Wizard is the size of a deck of cards and is made to be wired in between the stereo and the factory speaker as opposed to being mounted under a dash or on the passenger side of the vehicle.

The List Price of $39.95 is cost effective and about the same price as a good quality external mount speaker box, but without the concern of size, mount location and sound quality. Factory vehicle speakers are designed for the acoustics of the vehicle and are usually rated at 20 watts or greater making a world of difference as to how well you hear

We thank you all for your interest in our products.

John Rogus

Rogus Innovations








Automatic Stereo Muting in a Boat to hear VHF

Just got off the phone with a man in Clearwater, FL that wants to use the CBM-U2 in his boat. What a great idea. When a transmission is received, his cockpit stereo mutes, and the message will come through loud and clear on the speakers. And it won’t matter what kind of 2-way gear he has, as long as the receiver has an output jack that can drive an external speaker, he is good to go.

We knew that some of you out there might try this, so we encapsulated the CBM’s circuitry in a polymer. This protects the electronic components from moisture, and you know how wet your boat can get from just condensation alone. Just as a cold glass of brewski on the Gulf Coast sweats, so wouldn’t the sensitive components of the CBM in marine environment, and that’s why we encapsulate them.

On the technical side I recommend soldering all of the connections on the CBM-U2 in such an installation, and insulating with double walled shrink tubing. Double walled shrink tubing is what I use in my Jeep, and I highly recommend it for any connections that will see moisture. It works because the inner wall of the tubing melts and seals the outer wall during the heat-shrinking process. Way cool for mud buggies too.

Anyway, I sure the guy will enjoy the convenience of his purchase.

Keep the props in the water,


Our first Audio Interrupt Post

Audio Interrupt devices for CB, VHS, GPS, ham radio and radar detectors
Audio Interrupt for cars, boats, RV’s,  off road  vehicles

We started this blog to get the word out to others interested in CB, ham radio, GPS, VHS and radar detectors (all two-way radios) and if there are any questions out there on how to integrate any of these devices into a vehicle stereo system.

We’ve been doing some interesting integration into boats recently with our CBintercept.  We’d be interested if other boat owners want to mute their boat stereos to better be able to hear an incoming message from the VHS radio. 

There are a lot of truckers out there that don’t know they can automatically mute their stereos and have the CB or ham message come through the truck cab speakers.  We’d like to get the word out.

See our website at www.audiointerrupt.com – email  info [at] audiointerrupt.com